Blkbird Mantis Apex Easy XY
The Easy XY is a fine-adjustment bracket for use between the Mantis and your camera – It features 1″ (25mm) of front/back adjustment and more than 2.25″ (57mm) of left/right adjustment. BLKBRD easy rig quick release retrofit kit required
BLKBRD easy rig quick release retrofit kit required
The Easy XY is a fine-adjustment bracket for use between the Mantis and your camera* – it mounts to the top handle of any camera and allows the user to fine tune the exact center of the camera build on the Mantis elastic. It features 1″ (25mm) of front/back adjustment and more than 2.25″ (57mm) of left/right adjustment! A safety screw allows the user to adjust the location of either the Eyebolt or Ball Stud while under-load without worrying about the camera falling.
Dimensions: 4.5″ x 3.2″ x 0.6″ (115mm x 81mm x 16mm) Weight: 45g
Included in each Easy XY Kit is: 1x Easy XY, 1x Eyebolt, 1x Ball Stud, 2x Square 3/8″-16 Nuts, 2x Square Delrin Washers, 2x Round Delrin Washers, 2x #10 Truss Head Screws, & 2x 3/8″-16 Hex Bolts.
Weight .8 lbs
Dimensions 6 × 6 × 2 in
